Summit CLFD24WC Manuál Strana 10

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 34
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 9
Operation
Functions
Temperature Memory Function
If the power is suddenly lost, the set
temperature will be saved by the unit. Once
the power is back on, the unit will be at the
same set temperature.
“Close Door” Reminder Function
When you forget to close the door or the
door is not fully closed, there will be warning
alarm after 5 minutes.
Temperature Alarm Function
If the interior temperature is higher than
73°F (23°C), “HI” is shown on the display
panel and the buzzer alarm sounds
continuously after one hour. This indicates
that the inner temperature is too high, and
you should look for the reason. If the inner
temperature is lower than 32°F (0°C), “LO”
is shown on the display panel; the alarm
and the malfunction indicator light go on at
the same time.
Note:
If too many bottles are put in at once or the
door has not been closed tightly, the unit
will display the "HI" signal on the display
panel. This is normal. Please wait 5 minutes
after closing the door and “HI” will
disappear.
It is normal that the cabinet shows “HI” or
“LO” from time to time. If it occurs frequently
or lasts for a long time, you can restart the
unit by unplugging it, then re-plugging after
5 minutes. If the problem occurs again after
restarting, please contact customer service.
Before reconnecting the power, wait 3 to 5
minutes. Otherwise you could damage your
appliance. If you attempt to start the
appliance before the end of this time delay,
the appliance will not turn on.
If you turn on the appliance for the first time
or after a restart, or after it has been out of
operation for a long time, there may be a
temperature difference between the
temperature inside the appliance and that
on the LED display. This is a normal event
caused by the duration of the activation
period. Leave the appliance turned on for
several hours and the temperatures will
stabilize during operation.
9
Zobrazit stránku 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Komentáře k této Příručce

Žádné komentáře

Davey SUPERCELL 60F, 80F, 100F, 130F, 200F, & 250F P manuels

Manuels d'utilisation et guides de l'utilisateur pour Équipement pour l'eau Davey SUPERCELL 60F, 80F, 100F, 130F, 200F, & 250F P.
Nous fournissons des manuels en pdf 1 Davey SUPERCELL 60F, 80F, 100F, 130F, 200F, & 250F P à télécharger gratuitement par type de document : Manuel de l'utilisateur






Plus de produits et de manuels pour Équipement pour l'eau Davey

Modèles Type de document
EcoSpa Salt Water Spa Sanitisation System Manuel de l'utilisateur   Davey EcoSpa Salt Water Spa Sanitisation System User Manual [en] [es] , 6 pages
SP500 Series SPAPOWER CONTROLLERS Manuel de l'utilisateur   Davey SP500 Series SPAPOWER CONTROLLERS User Manual, 8 pages
PoolSweepa Wallclima/Optima Pool Cleaners Manuel de l'utilisateur   Davey PoolSweepa Wallclima/Optima Pool Cleaners User Manual, 16 pages
Skim Filter Wide Mouth Manuel de l'utilisateur   Davey Skim Filter Wide Mouth User Manual, 2 pages
SP800-20,30 Single/3 phase SPAPOWER CONTROLLER Manuel de l'utilisateur   Davey SP800-20,30 Single/3 phase SPAPOWER CONTROLLER User Manual, 18 pages
SP601 Series SPAPOWER CONTROLLERS Manuel de l'utilisateur   Davey SP601 Series SPAPOWER CONTROLLERS User Manual, 6 pages
SP1200-60 (1ph) SPAPOWER CONTROLLER Manuel de l'utilisateur   Davey SP1200-60 (1ph) SPAPOWER CONTROLLER User Manual, 18 pages